CarbonCut 9060 Pro

It is suitable for soft materials like plastics, acrylic, wood, MDF, foam, rubber, and silicone. It also heavily supports advanced composites like carbon fiber and fiber glass, as well as metals and materials including untreated EN steel, aluminium, copper, brass, granite, and PCBs.

It features a pioneering composite superstructure made of carbon fiber and fiber glass. This ensures no sagging, hogging, rust, or corrosion. The superstructure comes with a lifetime warranty under normal operating conditions.

The machine uses a 2.2 KW/3 HP spindle manufactured by Teknomotor in Italy. It operates at a maximum of 24,000 RPM, uses an ER20 collet, and features a manual tool change (MTC) system.

Yes, the machine is certified and rated for 24/7 continuous operations, allowing you to run long operations with confidence.

No, the machine is shipped fully built and assembled in a plug & play condition. If it is shipped with a control PC, the PC is also fully configured.

It features an air-cooled spindle along with a dual mist cooling system equipped with a flex pipe. This is operated by an integrated solenoid valve that is automatically controlled through GCODE by the CNC controller.

The machine requires a single-phase power input of 220V/110V. A standard 16 Amp plug point is required for operation.

The primary working area (X x Y) is 900 x 600 MM with a customizable Z-Axis travel of 150 MM. The 4th Axis (A Axis) has a usable length of 650 MM and comes equipped with a high precision 125MM 4 Jaw Chuck.

The machine has a certified repeat positioning accuracy of <50 microns, with actual tested accuracy falling between 15-25 microns (0.015 to 0.025 MM). Additionally, the spindle has a tested maximum run-out of <10 microns.