Sample designs in MDF that can be replicated with high accuracy across different materials. These and other similar designs can also be made into and sold as commercial products.
Video 1 – A JALI Design that can be used to make a nightlight. Cutting a base & top with 3 / 4 identical pieces & a light in the middle. With 3 / 4 pieces you can make it in a triangular or square/rectangular.
Item | Details |
|---|---|
Material | MDF |
Thickness | 3 MM |
Depth of Cut | 3 MM |
Bit Type | 3MM Tapered Bit |
Bit Length | 50 MM |
Bit Cutting Length | 20 MM |
Total Cutting Time | 32 Minutes |
Video 2 – A Teabag Design in multiple pieces that can be assembled and made into a functional product for hotels / restaurants etc.
Item | Details |
|---|---|
Material | MDF |
Thickness | 3 MM |
Depth of Cut | 3 MM |
Bit Type | 3MM Tapered Bit |
Bit Length | 50 MM |
Bit Cutting Length | 20 MM |
Total Cutting Time | 11 Minutes |
Video 3 – A design from a Childrens Cartoon (Totoro) in a single piece that can be assembled and made into a functional nightlight. A frame with soft LED’s in the back, an opaque acrylic / plastic sheet and the design in front will make it an ideal children’s nightlight.
Item | Details |
|---|---|
Material | MDF |
Thickness | 3 MM |
Depth of Cut | 3 MM |
Bit Type | 3MM Tapered Bit |
Bit Length | 50 MM |
Bit Cutting Length | 20 MM |
Total Cutting Time | 11 Minutes |
