OEM Components – Mechanical
Positioning Systems - X, Y & Z Axis
1605 Rolled Ball Screws and HG 20 Linear Guides from Hiwin/GLT are used for all three axis as a positioning system.
IMPORTANT – The systems are pre-lubricated and you are advised to follow the OEM standards on lubrication, which can be found at the following link
Hiwin – https://www.hiwin.com/pdf/lubricating_instructions.pdf (Can also be used for GLT)
Ball Screw
Linear Guide
![](https://www.hiwin.us/wp-content/uploads/ballscrews_large.jpg)
![](https://www.hiwin.us/wp-content/uploads/hg_series_linear_guideway_large.jpg)
Positioning Systems - A Axis - Standard Models
With a backlash of <10 Arc Minutes this is a wormgear suited for any task. It comes preinstalled on the machine with a suitable tailstock.
The specifications are embedded below.
![](https://akriti.tech/wp-content/uploads/2022/06/P1030390-768x576.jpg)
Positioning Systems - A Axis - Professional Model
With a backlash of <5 Arc Minutes this is a wormgear suited high precision Tasks. It comes preinstalled on the machine with a suitable tailstock.
The specifications are embedded below.
![](https://akriti.tech/wp-content/uploads/2022/07/pitson-nwp-series-768x576.png)
* Indicative Image Only