Dimensions (Outer) - Length | |
Dimensions (Outer) - Width | |
Dimensions (Outer) - Height | |
Dimensions (Build / Cutting Area) | |
Dimensions (Build / Cutting Area) | |
Dimensions (Build / Cutting Area) | |
Max Stock Height (Z Axis) | |
Electronics Board - Dimensions | 360 (L) x 360 (W) x 190 (H) (MM) |
| Akriti Composite Superstructure |
Max Travel Speed (X Axis) | |
Max Travel Speed (Y Axis) | |
Max Travel Speed (Z Axis) | |
| |
| |
| |
| |
Spindle - Voltage in Volts | |
| |
| |
Spindle - Current in Amps (Star / Delta ) | |
| |
| |
| Less than 20 Microns / 0.02 MM |
Spindle - Materials Capability | Soft Metals - Aluminium, Copper, Brass, Bronze, Zinc, Nickel, All Non Ferrous metals and alloys.
Soft Materials - Wood, MDF, Plywood, Acrylic, Plastics, PEEK, Delrin, Rubber, Silicon, Composites, Foam, PCB, Styrofoam |
| Hiwin Rolled Ball Screw & Nut - 20 MM |
| Hiwin Rolled Ball Screw & Nut - 20 MM |
| Hiwin Rolled Ball Screw & Nut - 20 MM |
| Hiwin 25 MM Linear Guide & Block - 2 Lengths |
| Hiwin 25 MM Linear Guide & Block - 2 Lengths |
| Hiwin 25 MM Linear Guide & Block - 2 Lengths |
| |
Stepper Motor (X & Y Axis) - Model | NEMA 34, Bipolar - Stepper Motor (Made in Japan) |
Stepper Motor (X & Y Axis) - Motor type | |
Stepper Motor (X & Y Axis) - No. of steps/rotation | |
Stepper Motor (X & Y Axis) - Holding Torque | |
Stepper Motor (Z Axis) - Model | NEMA 24, Bipolar - Stepper Motor |
Stepper Motor (Z Axis) - Motor type | |
Stepper Motor (Z Axis) - No. of steps/rotation | |
Stepper Motor (Z Axis) - Holding Torque | |
Repeat Positioning Accuracy | |
Single Step Movement by Stepper | |
Stepper Motor Drivers - Max Current | |
Stepper Motor Drivers - Voltage Input | |
| |
| |
Stock / Material Fixturing Support | Aluminium - M5 T-slot Profiles - Pre-installed |
| Simultaneous 3 Axis Motion - Full Interpolation |
| |
| Single Phase Input - 220V / 110V |
| 16 Amp Plug Point Required |
| |
| |
| Ships Fully Assembled with selected accessories |
| Certified for 24/7 Operations |
| 1 Year Warranty - All Parts Covered |
| Up to 10 Years Extended Warranty - Optional |
| Annual Maintenance Contracts - Optional |
| |
| Fully compliant with GCODE / MCODE (GRBL) |
| Windows XP (64 bit), 7, 8, 10, 11, MacOS X, Linux (any), Raspberry Pi / ARM |
Minimum Control PC Specification | 2GB of RAM and a 1280 x 768 screen size |
Recommended Control PC Specification | 8GB of RAM, Intel 8th Gen Processor / AMD Zen 3 Architecture Processor & a minimum 1280 x 768 screen size |
Included PC Specifications | |
Metric / Imperial Support | Supports Both MM & Inches |
| All of our measurements are made with Mitutoyo calibrated instruments |